If you are reading this post, it’s obvious that you are concerned about the lifespan of your water heater and you’re willing to do all it takes to extend its life span.
But, how long does it take, before you replace your water heater?
Apparently, a typical water heater can last up to 8 – 12 years, depending on the brand you purchased. Although in rear cases you find some homeowners using their water heater for up to 15 to 20 years.
These days, many of the tanks available in the market are lined with porcelain or glass, which makes them even susceptible to oxidation and deterioration easily.
However, in some cases, we find some of the tanks leaking at a slow or fast pace. Thus, it’s pertinent to know the location of your water shutoff valve.
Also, it’s important to note, that many water heaters decrease in efficiency without the homeowners even noticing.
Hence, you have to take preventive measures to ensure that your water heaters last long enough to give you your money’s worth.
Here are 5 things you can do to extend the lifespan of your water heater.
Install a Second anode rod
The installation of a second anode rod will largely enhance the increase in the lifespan of your water heater. The anode rod is composed of aluminum or magnesium.
Thus, it acts as the sacrificial rod, which prevents the tank from corrosion.
Make Use of an Expansion Tank
The installation of an expansion tank can possibly increase the life of your water heater, especially if you’re on a closed system. As a matter of fact, your tank experiences an additional volume, anytime water is heated from 50 degrees to 120 degrees centigrade.
What this simply means is that your tank experiences a 2 percent increase anytime your tank expandswhen the water is heated.
It makes it even worse if you have a closed water system, (When you have a valve that stops water from flowing back to the main source) because your water will have no place to go as it’s not a compressible matter.
Thus, there will be quick increases and decreases in the pressure of the water pressure. By this, you will put more stress on your plumbing system and your water heater.
This will eventually lead to its premature failure and damage.
Flushing Or CleaningOut Your Tank Periodically
It’s important for you to engage in flushing your tanks every year to avoid any form of sediment or mold buildup in your tank, especially if you have an old tank. This will keep your truck lasting for a longer time.
However, most of the new model water heaters in the market are self-cleaning.
Installation of a (PRV) Pressure Regulating Valve
If your water pressure is quite high reaching above 90 PSI, there is a possibility that it can destroy your appliances and cause your water pressure to experience a premature failure.
Thus, it’s wise to install a regulating valve for the pressure to reduce the pressure of the system. By doing this, you’d limit the rate at which your appliances experiences wear and tear.
Also, note that you can install an expansion tank if you have PRV.